HS-805BB Servo-Stock Rotation

SKU:
$41.99

Known as the “monster” servo, the HS-805BB uses a heavy duty nylon gear train and a strong 10mm, 15 tooth output shaft to generate 343 oz-in of torque that will easily move just about any large plane, car, truck or boat!

How Far Will This Servo Rotate?

The answer to this question is partially dependant on what you are using to control the servo.
Click for a quick video explanation.

With an Average Radio System:
94°
Your average transmitter and receiver will output a relativly narrow PWM signal range.

Radio System + Servo Stretcher:
199°
Adding a Servo Stretcher to your radio system setup will allow you to achieve wide PWM signal ranges.

Wide Signal Controllers:
199°
Controllers such as the Actobotics® Servo Controller, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.

Tech Tips

Specs

Output Shaft Style D15T Spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.19sec/60°
No-Load Speed (6.0V) 0.14sec/60
Stall Torque (4.8V) 274.96 oz-in (19.8 kg.cm)
Stall Torque (6.0V) 343.01 oz-in (24.7 kg.cm)
Max PWM Signal Range 556-2420μsec
Travel per µs .105°/μsec
Max Rotation 199°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (4.8V) 8mA
Current Drain - idle (6.0V) 8.7mA
Current Drain - no-load (4.8V) 700mA
Current Drain - no-load (6V) 830mA
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 8µs
Motor Type 3 Pole Ferrite
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Material Nylon
Wire Length 11.81" (300mm)
Weight 5.36 oz. (152g)
Wire Gauge 22AWG
Servo Size Large
$41.99