HSB-9380TH Servo

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption, and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers.

How Far Will This Servo Rotate?

The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.

Stock:

With an Average Radio System:
67°
Your average transmitter and receiver will output a relatively narrow PWM signal range.

Radio System + Travel Tuner:
120°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.

Wide Signal Controllers:
120°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.

Reprogrammed:

Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.

With an Average Radio System:
115°
Your average transmitter and receiver will output a relatively narrow PWM signal range.

Radio System + Travel Tuner:
205°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.

Wide Signal Controllers:
205°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.

Special Features

  • Constant torque output: Revolutionary circuit and motor designs allow the HSB-9XXX Series servos to maintain their speed in a more consistent manner, regardless of load.
  • Hybrid MPD 1st Gear: Unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle
  • Custom NeuMotor: Designed by Steve Neu exclusively for the HSB-9XXX Series, these high performance, brushless motors provide long-standing durability and performance.

Brushless Advantages

  • At least FIVE TIMES longer-lasting than brushed servos.
  • 30% faster response times.
  • Greater resistance to jolts and vibration.
  • Smoother operation.
  • Same power consumption as brushed digital servos.
  • Same compact case size as standard servos.
  • Exceptionally durable geartrain.
  • Smooth dual ball bearings

PLEASE NOTE

While compatible with most radio control devices, the regenerative braking feature of the HSB-93XX series servos may cause a problem if the device cannot accept a backflow of current. The types of devices that cannot accept this backflow are: Voltage Regulators, Power Safe Receivers and certain BEC circuits whether stand alone or integrated within an Electronic Speed Control. Check with the manufacturer or the Hitec website for a list of compatible models. If your device cannot accept a current backflow, then you must install a PAD (Power Absorbing Device - Hitec PN# 55756) as described in the manual. A PAD is included with every Hitec brushless servo.

Tech Tips

Specs

Output Shaft Style H25T Spline
Voltage Range 6.0V - 7.4V
No-Load Speed (7.4V) 0.14 sec/60°
No-Load Speed (6.0V) 0.17 sec/60°
Stall Torque (6.0V) 472 oz-in (34 kg.cm)
Stall Torque (7.4V) 472 oz-in (34 kg.cm)
Max PWM Signal Range 700-2300μsec
Travel per µs (Stock) .075°/μsec
Max Rotation (Stock) 120°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Brushless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Material Titanium (Hybrid MPD 1st Gear)
Wire Length 11.81" (300mm)
Weight 2.4oz (68g)
Wire Gauge 20AWG
Servo Size Standard
Max Rotation (Reprogrammed) 205°
Travel per µs (Reprogrammed) 0.128°/μsec

This website uses cookies to ensure you get the best experience on our website