TT Right Angle Gear Motor Mount

SKU:
$1.49

This handy little bracket provides a simple way to fasten a TT Gear Motor to an Actobotics part.  Three of the four holes are on the 0.77" pattern (measuring 0.385" between the holes) while the fourth hole is placed 1.061" from the first hole to be on the 1.5" pattern.  The included 4-40 screws will pass through the holes in the motor housing and thread into the acetal plate for a good solid hold.

Specs

Material Acetal
Weight 0.20 oz (5.6g)
$1.49