Shop By Product

Super Duty Linear Actuator Mounting Bracket

shown with included hardware
shown with included hardware
  • shown with included hardware
1 of 2

Be the first to review this product

In stock
This Product? Share It!


The HDM500 actuator mount works with our Super Duty line of linear actuators.  The mounting holes are 1/2" in diameter so that it can be fastened down to a surface using 1/2"-13 bolts, available at your local hardware store.  The included shoulder bolt provides a polished surface for the clevis of the actuator to rotate smoothly on.  The HDM500 actuator mount will work on either end of our SDA series actuators.  

Included Hardware: 

1) Shoulder Bolt (1/4” Hex Drive Size)




Product Weight 12 oz
Material Aluminum
Compatible Linear Actuators Super Duty Linear Actuators

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2020 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.