1206 Series Pattern Adaptor (16-1)

The thru-holes on this adaptor align with the 16mm pattern found on almost every goBILDA part but are slotted outward for edge-case situations where you need to align with holes spaced 24mm across the center. The counterbores allow heads of M4 socket head screws to rest below the top surface so you have a clean slate to fasten a part to.

The remaining holes are positioned on the Actobotics 0.77" pattern, and threaded to 6-32 UNC so that you can fasten any Actobotics thru-hole component with ease.