32 Pitch, Brass Bevel Gears

These bevels gears have a fine pitch in order to provide an extremely smooth mesh, and with minimal friction. Bevel gears are cut in such a way that a very specific mating gear is required to create a proper mesh. Use a 24 tooth bevel gear with another 24 tooth bevel gear to create a 1:1 ratio, or use a 16 tooth bevel gear with a 32 tooth bevel gear to create a 2:1 ratio. 

Compatible Combinations:
16 Tooth & 32 Tooth = 2:1 Ratio
24 Tooth & 24 Tooth = 1:1 Ratio
Other combinations will not mesh together properly.

1/4" Bore

6mm Bore

5mm Bore

4mm Bore

This website uses cookies to ensure you get the best experience on our website