Shop By Product

HS-5496MH Servo

  • HS-5496MH with quarter for scale
  • HS-5496MH included hardware
  • HS-5496MH back view
  • HS-5496MH in box
  • HS-5496MH side view
  • HS-5496MH top view
1 of 7

Be the first to review this product

Price
$34.99
$34.99 - $64.99
Sign up for Price Alert
Part
35496S
35496S
Status
In stock

* Required Fields

Price
$34.99
$34.99 - $64.99
Sign up for Price Alert
This Product? Share It!

Details

At Hitec, they believe in developing the highest quality servos in the market at an affordable price. That philosophy stands true with the economical HS-5496MH metal gear digital sport servo. Based on the popular HS-5485HB, the HS-5496MH is the perfect match for match for sport airplanes up to 25% scale as well as sport cars and trucks. With 7.4 volt, 2-cell LiPo battery capability, The HS-5496MH delivers the power you need at a price you can feel good about!

SPECS

Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points

Dimensions 1.57" x 0.78" x 1.49" (39.8 x 19.8 x 38 mm)
Product Weight 1.84oz (52g)
Output Shaft Style 24 tooth (C1) spline
Voltage Range 6.0V - 7.4V
No-Load Speed (6.0V) 0.17sec/60°
No-Load Speed (7.4V) 0.15sec/60°
Stall Torque (6.0V) 88.8 oz/in. (6.4kg.cm)
Stall Torque (7.4V) 104.2 oz/in. (7.5kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .078°/μsec
Travel per µs (reprogrammed normal res) .133°/μsec
Max Travel (out of box) 117.5°
Max Travel (reprogrammed normal res) 200°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (6.0V) 10mA
Current Drain - idle (7.4V) 12mA
Current Drain - no-load (6V) 170mA
Current Drain - no-load (7.4V) 190mA
Current Drain - stall (6V) 1200mA
Current Drain - stall (7.4V) 1400mA
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 4µs
Motor Type Cored Metal Brush
Potentiometer Drive 2-Slider, Direct Drive
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material 1 Resin, 3 Metal Gears
Wire Length 11.81" (300mm)
Wire Gauge 25AWG
TECH TIPS

General Servo Information:

Servo Tech Tip Videos:

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.