HS-5585MH Servo
The HS-5585MH Servo features a high performance coreless motor, heavy-duty metal gears and dual ball bearings, and is rated for 7.4 volt, 2S LiPo operation. The HS-5585MH supplies your 1/10th monster trucks to 1/8th scale buggies and truggies and high performance airplanes up to 35 percent with outstanding strength and precision.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
71°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
118°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
118°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
120°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
200°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
200°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Features
- Rated for 2S LiPo operation
- Ideal for 1/10 scale monster trucks, 1/8 scale buggies, and high performance airplanes up to 35%
- Heavy duty metal gears and dual ball bearings
- Coreless motor
- Two year limited warranty through Hitec beginning at date of purchase
Tech Tips
Specs
| Output Shaft Style | C24T Spline |
|---|---|
| Voltage Range | 6.0V - 7.4V |
| No-Load Speed (7.4V) | 0.14sec/60° |
| No-Load Speed (6.0V) | 0.17sec/60° |
| Stall Torque (6.0V) | 194 oz-in (14 kg.cm) |
| Stall Torque (7.4V) | 236 oz-in (17 kg.cm) |
| Max PWM Signal Range | 750-2250μsec |
| Travel per µs (Stock) | .079°/μsec |
| Travel per µs (Reprogrammed) | .134°/μsec |
| Max Rotation (Reprogrammed) | 200° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 2µs |
| Motor Type | Coreless |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Dual Ball Bearings |
| Gear Material | Metal |
| Wire Length | 11.81" (300mm) |
| Weight | 2.10oz (60g) |
| Wire Gauge | 22AWG |
| Servo Size | Standard |
| Max Rotation (Stock) | 118° |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the HS-5585MH Servo.
goBILDA
