Shop By Product

Motor Mount H (AndyMark Orbital/REV HD Hex Motors)

includes (4) M3 x 8mm Zinc-Plated Socket Head Cap Screws
includes (4) M3 x 8mm Zinc-Plated Socket Head Cap Screws
  • includes (4) M3 x 8mm Zinc-Plated Socket Head Cap Screws
  • shown attached to an AndyMark Orbital gear motor
  • shown attached to an REV HD Hex Motor
  • Product Insight #1
  • Product Insight #2
  • Product Insight #3
1 of 7

Be the first to review this product

Part
555200
555200
Status
In stock
This Product? Share It!

Details

This motor mount is compatible with the AndyMark Orbital 20 Gearmotor as well as the REV Robotics HD Hex Motor. We offer this mount in order to support teams who use Actobotics to build their chassis, and wish to utilize the above motors. 

When using an AndyMark Orbital 20 Gearmotor in conjunction with this mount, the motor shaft will protrude 0.75” from the face of the motor mount. When the mount is fastened to the outside of channel, this will put the shaft exactly halfway through which is perfect for using a shaft coupler to convert to a ¼” output as shown in the Product Insights above. 

When using a REV HD Hex Motor in conjunction with this mount, the motor shaft will protrude 1.41” from the face of the motor mount. Because the motor shaft is so long, a coupler would not be able to be used in the same way as with the AndyMark Motor. If you’re open to cutting the motor shaft you can then tailor it to the desired length.

SPECS

555200 Schematic

Product Weight 0.54oz (15.4g)
Material Aluminum
Motor Size Compatibility AndyMark Orbital/REV HD Hex Motors
RESOURCES

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2019 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.