Shop By Product

Right Angle Gear Motor

  • Use in conjunction with our  2.55” press-fit wheels
  • The motor is pre-wired with 12” power wires
  • Use in conjunction with our  2.55” press-fit wheels
  • Use in conjunction with our  2.55” press-fit wheels
  • Mounts both horizontal and upright
  • Perfect for building a compact robot chassis
  • Use in conjunction with our  2.55” press-fit wheels
  • The motor is pre-wired with 12” power wires
  • Use in conjunction with our 3.10” press-fit wheels
  • Shown with motor mount #555184
  • Shown with motor mount #555184
  • Shown with motor mount #555184
  • Shown with motor mount #555184 and a beam
  • Shown with motor mount #555184 and a beam
  • Shown with motor mount #555184
  • Shown with motor mount #555184
  • Shown with motor mount #555184
  • Shown with motor mount #555184 and mini channel
  • Shown with motor mount #555184 and a hub mount
  • Shown with motor mount #555184 and mini channel
  • Shown with motor mount #555184 and channel
  • Shown with motor mount #555184 and a hub mount
1 of 23

Be the first to review this product

Part
638336
638336
Status
In stock
This Product? Share It!

Details

These gear motors are an inexpensive way to put your project in motion! The required voltage is 4.5-6V with a no load current of 190mA. The output shaft is 9mm long and the gearbox ratio is 48:1 with a wheel speed of 140 RPM (unloaded). These are the motors used on our popular Runt Rover Robot Kit series. Use with our 2.55” or 3.10” press-fit robot wheels.
SPECS

Right Angle Gear Motor Schematic

Voltage (Nominal) 4.5V
Voltage Range (Recommended) 4.5V - 6.0V
Speed (No Load)* 140RPM
Current (No Load)* 190mA
Current (Max Load)* 250mA
Torque (Stall)* 800 gf-cm (11.11 oz-in)
Gear Ratio 48:1
Gear Material Plastic
Gearbox Style Face Gear / Straight Cut Spur
Motor Type Brushed DC
Output Shaft Diameter 5.3mm
Output Shaft Style Double Flats
Output Shaft Support Plastic Case
Electrical Connection Male Header Pin
Wire Length 12”
Wire Gauge 26awg
Mounting Screw Size 4-40
Product Weight 0.07 lbs
PROJECTS

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2017 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.