Our SPT200 Direct Drive Pan & Tilt System is perfect for cameras or sensor up to 2lbs. The rigid 1/4” ABS plastic platform and aluminum servo horns on each axis make this compact pan and tilt system very rigid. Each axis is supported by a 1/4” precision ball bearing which allows the servos to handle loads applied from any direction. The 1/4” thru-holes in the top plate make it easy to mount a camera or sensor. The top plate can easily be drilled to accept other attachments if needed. The SPT200 will accept any standard size servo with a 24 or 25 tooth spline (2 servos are required to assemble the kit). For loads up to 1lb, the HS-485HB or HS-645MG servos work well. For loads exceeding 1lb, the HS-5685MH works well. For the ultimate in torque and precision, the HS-7950TH or HSB-9380TH is recommended. Units come in kit form with a full set of instructions. Servos are not included and must be purchased separately.
|Product Weight||5.5 oz|
|Maximum Payload||2 lbs|
|Servo Spline Compatibility||24T or 25T standard spline|
|Servo Size Compatibility||Standard size servos|