SPT200 Pan & Tilt Kit

Our SPT200 Direct Drive Pan & Tilt System is perfect for cameras or sensor up to 2lbs. The rigid 1/4” ABS plastic platform and aluminum servo horns on each axis make this compact pan and tilt system very rigid.  Each axis is supported by a 1/4” precision ball bearing which allows the servos to handle loads applied from any direction.  The 1/4” thru-holes in the top plate make it easy to mount a camera or sensor.  The top plate can easily be drilled to accept other attachments if needed.  The SPT200 will accept any standard size servo with a 24 or 25 tooth spline (2 servos are required to assemble the kit).  For loads up to 1lb, the HS-485HB or HS-645MG servos work well. For loads exceeding 1lb, the HS-5685MH works well.  For the ultimate in torque and precision, the HS-7950TH or HSB-9380TH is recommended.  Units come in kit form with a full set of instructions. 

(Servos and camera not included and must be purchased separately).  

Specs

Maximum Payload 2 lbs
Weight 5.5 oz
Servo Spline Compatibility H25T or C24T
Servo Size Compatibility Standard size servos