World Robotics League Base Kit
SKU:
Build System: Actobotics
DISCONTINUED This product has been discontinued.
$1,690.90
This World Robotics League Base Kit has a compilation of over 3,400 of the best approved parts to set your team up for a successful year of competing. The kit includes a variety of structural components from the versatile Actobotics Channel and X-Rail down to the mini channel and aluminum beams for those space limited areas within your robot. In addition you'lle receive three Hitec HS-485HB servos, one HSR-1425CR continuous rotation servo and four YellowJacket Planetary Gear Motors. To transfer power from these premier servos and motors you’ll receive gears, mounts, horns, hubs and shafting. Get ready to ‘roll’ to competition with this kit as it comes with precise stainless ball bearings. Don't forget to check out the WRL Expansion Kit for those extra must have parts!
For your convenience, we also accept school purchase orders from approved applicants. Be sure to apply for your team discount!
| Electronics | ||
| Part Number | Qty | Description |
| 3101-0012-0060 | 1 | Smart NiMH/NiCAD Battery Charger |
| 14-0014 | 1 | 12V 3000mAh NiMH Battery |
| 3801-0030-0020 | 1 | Tamiya to XT30 Adaptor |
| 33485S00 | 3 | Hitec HS-485HB Servo |
| 3801-0613-0100 | 4 | 2-Pin JST VH to 3.5 mm Female Bullet Adaptor |
| 3801-0709-0300 | 4 | JST XH Series to JST PH Series Adaptor |
| 31425CR | 1 | HSR-1425CR Servo |
| 3802-1718-0300 | 2 | 12" Hitec Super-Duty Extension |
| 3802-1718-0600 | 2 | 24" Hitec Super-Duty Extension |
| 3805-1718-0300 | 1 | 12" Hitec Super-Duty Y-Harness |
| 605041 | 1 | Battery Mount Kit |
| 5202-0002-0051 | 4 | 5202 Series Yellow Jacket Planetary Gear Motor (50.9:1 Ratio, 117 RPM, 3.3 - 5V Encoder |
| Structure | ||
| Part Number | Qty | Description |
| 585440 | 8 | 1.50” Aluminum Channel |
| 585446 | 4 | 6.00” Aluminum Channel |
| 585450 | 2 | 9.00” Aluminum Channel |
| 585454 | 4 | 12.00" Aluminum Channel |
| 585460 | 1 | 16.50” Aluminum Channel |
| 565042 | 2 | 10.50" X-Rail |
| 565046 | 2 | 12.00" X-Rail |
| 585468 | 2 | Flat Single Pattern Bracket |
| 585720 | 6 | 3" x 1.5" Pattern Plate (3 hole) |
| 585728 | 2 | 12" x 1.5" Pattern Plate (15 hole) |
| 585586 | 2 | Flat 0.770" Pattern Bracket C |
| 585588 | 2 | Flat 0.770" Bracket D |
| 585592 | 2 | Flat 0.770" Pattern Bracket F |
| 585002 | 1 | 4.5” x 6” Aluminum Pattern Plate |
| 585004 | 1 | 4.5” x 12” Aluminum Pattern Plate |
| 585006 | 1 | 9” x 12” Aluminum Pattern Plate |
| 585376 | 2 | 0.375” Mini Channel |
| 585380 | 2 | 1.54" Mini Channel |
| 585392 | 2 | 6.16" Mini Channel |
| 585399 | 2 | 12.32" Mini Channel |
| 585404 | 2 | 1.54" (5 hole) Aluminum Beam |
| 585416 | 2 | 6.16" (17 hole) Aluminum Beam |
| 585423 | 2 | 12.32" (33 hole) Aluminum Beam |
| 585628 | 2 | 90° Flat Pattern Bracket A |
| 585600 | 4 | Beam Attachment Block |
| 585470 | 8 | 90° Dual Side Mount A |
| 585644 | 2 | Actobotics Hinge |
| 545372 | 8 | 0.125" Hub Spacer |
| 545440 | 4 | 0.770" - 0.770" Pattern Adaptor |
| 545384 | 4 | 0.500" Hub Spacer |
| 1206-0016-0004 | 2 | 1206 Series Pattern Adaptor (16-4) |
| 555176 | 8 | 32mm Bore Bottom Tapped Motor Mount |
| 575124 | 2 | Standard Servo Plate B |
| 575112 | 2 | Standard Servo Plate A |
| 575148 | 2 | Standard Servo Plate D |
| 585424 | 10 | 90° Single Angle Pattern Bracket |
| 545360 | 6 | Side Tapped Pattern Mount C |
| 545420 | 4 | Side Tapped Pattern Mount A |
| 545400 | 2 | 90° 0.770" Pattern Mount |
| 545532 | 2 | Channel Connector Plate |
| Drive Components | ||
| Part Number | Qty | Description |
| 545579 | 8 | 0.250" Bore Set Screw D-Hub (Tapped), 0.770" Pattern |
| 545618 | 8 | 6mm Bore Clamping D-Hub (Tapped), 0.770" Pattern |
| 625302 | 8 | 0.250" (1/4) Steel Set Screw Collar |
| 625102 | 8 | 1/4" Flanged Aluminum Clamp Collar |
| 615242 | 1 | 16T, 0.250" (1/4) Bore 32P Shaft Mount Pinion Gear |
| 615250 | 2 | 24T, 0.250" (1/4) Bore 32P Shaft Mount Pinion Gear |
| 615190 | 2 | 32 Pitch, 48 Tooth (.50" Bore) Aluminum Hub Gear |
| 595410 | 4 | 4" Heavy Duty Wheel |
| 595671 | 4 | 4" Omni Wheel |
| 535198 | 16 | 1/4" ID x 1/2" OD Flanged Ball Bearing |
| 535118 | 2 | 1/2" Bore, Face Thru-Hole Pillow Block |
| 633104 | 100 | 0.250" Shafting and Tubing Spacer |
| 625100 | 2 | 1/4" - 6mm HD Shaft Coupler |
| 634084 | 12 | 0.250" x 6.00" Stainless Steel D-Shafting |
| 634094 | 1 | 0.250" x 12.00" Stainless Steel D-Shafting |
| 525124 | 2 | 24T Lightweight Hub Horn |
| 525148 | 1 | 0.250” Bore Clamping Servo Shaft Coupler (24T Broach) |
| 525122 | 2 | 24 Tooth Servo Shaft Hub (0.500") |
| RHS-250-24 | 4 | 24 Tooth 0.770" Acetyl Hub Mount Sprocket 0.250" Pitch |
| RHS-250-32 | 4 | 32 Tooth 0.770" Acetyl Hub Mount Sprocket 0.250" Pitch |
| 615146 | 1 | 0.250" Chain (5ft) |
| 615144 | 1 | 0.250" Pitch Metal Chain Connecting Link (4 pack) |
| 545444 | 1 | Dual Ball Bearing Hub |
| Fasteners/Hardware | ||
| Part Number | Qty | Description |
| 2909-0101-0100 | 100 | Zip Ties (100mm Length, Black) |
| 7122A16 | 1 | 3/32" SAE Hex Key |
| 57185A44 | 1 | 7/64" Extra Long SAE Hex Key |
| 7122A17 | 1 | 7/64" SAE Hex Key |
| 633122 | 4 | 0.500" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) |
| 633130 | 4 | 1.00" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) |
| 633136 | 12 | 1.32" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) |
| 633140 | 4 | 1.50" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) |
| 633164 | 8 | 0.250" Length, 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) |
| 633166 | 4 | 0.500" Length, 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) |
| 633170 | 4 | 1.000" Length, 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) |
| 632106 | 400 | 6-32 x 0.250" Zinc-Plated Socket Head Machine Screw |
| 632108 | 400 | 6-32 x 0.3125" Zinc-Plated Socket Head Machine Screw |
| 632110 | 400 | 6-32 x 0.375" Zinc-Plated Socket Head Machine Screw |
| 632112 | 200 | 6-32 x 0.4375" Zinc-Plated Socket Head Machine Screw |
| 632114 | 200 | 6-32 x 0.500" Zinc-Plated Socket Head Machine Screw |
| 632116 | 200 | 6-32 x 0.5625" Zinc-Plated Socket Head Machine Screw |
| 632118 | 200 | 6-32 x 0.625" Zinc-Plated Socket Head Machine Screw |
| 632120 | 200 | 6-32 x 0.750" Zinc-Plated Socket Head Machine Screw |
| 632124 | 200 | 6-32 x 1.00" Zinc-Plated Socket Head Machine Screw |
| 632128 | 100 | 6-32 x 1.25" Zinc-Plated Socket Head Machine Screw |
| 632142 | 400 | 6-32 Nylock Nuts Pack |
| 632144 | 100 | #6 Undersized Washer |
| 98847A007 | 1 | 6-32 Stainless Steel Threaded Rod |
| 585474 | 24 | Single Screw Plate |
| 585756 | 16 | Single X-Rail Mount |
| 636075 | 8 | Plastic Locking Grommet |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the 637072.
