This 23 RPM brushed HD Premium Planetary Gear Motor packages a planetary gearbox and a 6mm D-shaft to drive your project.
You can use its M3 threaded holes to fasten it to your project with M3 screws. Its 32mm gearbox diameter also provides for implementation with the use of 32mm bore clamping mounts.
Stalling this gearmotor could cause gear damage.
Output Shaft Style | D-shaft |
---|---|
Motor Type | Brushed DC |
Output Shaft Support | Dual Ball Bearings |
Gear Material | brass primary, nylon secondary, steel tertiary |
Weight | 12.9 oz (366g) |
Voltage (Nominal) | 12V |
Voltage Range (Recommended) | 6V - 12V |
Speed (No Load @ 12VDC) | 23 rpm |
Current (No Load @ 12VDC) | 0.54A |
Current (Stall @ 12VDC) | 20A |
Torque (Stall @ 12VDC) | 4,166 oz-in (300 kgf-cm) |
Gearbox Style | Planetary |
Connector Type | Male Spade Terminal |
Gear Ratio | 369:1 |