Shop By Product

970 RPM Econ Gear Motor

  • Use with our 4mm bore clamping hubs
  • Use our quick connect power input board with this motor (#605118)
  • Shown with a set screw hub and a precision disk wheel
  • We offer several 4mm bore gears that work with this motor
  • Use with our 4mm bore set screw hubs
  • Shown with a 4mm to 1/4” shaft coupler
  • shown attached to 25mm clamp (585716)
  • shown attached to 25mm clamp (585716) and aluminum channel
  • shown attached to 25mm clamp (585716) and aluminum channel
1 of 10

Be the first to review this product

Part
638358
638358
Status
In stock
This Product? Share It!
SPECS

638356-638358 Schematics

Gear train damage can occur if stalled (locked)

*At Nominal Voltage

Voltage (Nominal) 12V
Voltage Range (Recommended) 6V - 18V
Speed (No Load)* 970 rpm
Current (No Load)* 0.10A
Current (Stall)* 3.8A
Torque (Stall)* 53.14 oz-in (3.83 kgf-cm)
Gear Ratio 10:1
Gear Material Metal
Gearbox Style Straight Cut Spur
Motor Type DC
Output Shaft Diameter 4mm (0.1575”)
Output Shaft Style D-shaft
Output Shaft Support Bushing
Electrical Connection Male Spade Terminal
Operating Temperature -10°C ~ +60°C
Mounting Screw Size 3mm
Product Weight 0.19lb (3.05oz)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2018 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.