2 Stage Viper-Slide Kit

SKU: Build System: goBILDA
$109.99

This Two Stage Viper-Slide Kit utilizes Steel Viper-Slides as the backbone of this very smooth and stable slide kit. The Viper Slides are steel so that excellent strength and durability could be captured in a compact form factor.

The kit is easily fastened to your robot chassis or project given the number of holes available on the 1120 Series U-Channel at the base of the slide. At the business end, you’ll find a plate with a combination of thru-holes and threaded holes to make fastening a ServoBlock™, Channel or other components a breeze.

Use the kit in any orientation, whether you’re reaching up or out. The maximum travel (difference between retracted and extended) is 488mm (19.2”) while measuring only 384mm (15.1”) tip to toe in the retracted state.

The kit comes with all the necessary pieces, minus the motor, to get you up and going. The included 1201-0043-0002 Pattern Mount, and 8mm REX Sonic Hub are compatible with the goBILDA 5203 Series Yellow Jacket Gear Motors. Tailor your travel speed with the various ratios we offer. The included pulley has a circumference of 112mm (4.4”) which means each rotation of the pulley will cause the slide kit to move that amount. Given the max travel of 488mm, it takes approximately 4.4 rotations of the motor shaft to reach full extension. A 13.7:1 ratio (435 RPM) gear motor is the fastest that we recommend, as it’s able to fully extend the two stages in about 0.6 seconds! With such a fast potential transit speed it’s recommended to utilize the encoder on the 5203 Series motor so you can start and stop your slide kit at the limits of the travel.

Kit Contents:

SKU Qty Name
1120-0001-0048 1 1120 Series U-Channel (1 Hole, 48mm Length)
1121-0015-0384 1 1121 Series Low-Side U-Channel (15 Hole, 384mm Length)
1201-0043-0002 1 1201 Series Quad Block Pattern Mount (43-2)
1309-0016-4008 2 1309 Series Sonic Hub (8mm REX Bore)
1502-0006-0080 1 1502 Series 4mm ID Spacer (6mm OD, 8mm Length) - 4 Pack
1609-0610-0004 2 1609 Series V-Groove Bearing (4mm ID x 10.5mm OD, 6mm Thickness) - 2 Pack
2500-0014-0336 2 Steel Viper-Slide (14-Ball Carriage, 336mm Length, 244mm Travel)
2501-0001-0001 1 Steel End-Stop for Viper-Slide (1-1) - 6 Pack
2501-0001-0002 1 Steel Pulley Bracket for Viper-Slide (1-2) - 4 Pack
2802-0004-0010 1 2802 Series Zinc-Plated Steel Button Head Screw (M4 x 0.7mm, 10mm Length) - 25 Pack
2802-0004-0014 1 2802 Series Zinc-Plated Steel Button Head Screw (M4 x 0.7mm, 14mm Length) - 25 Pack
2802-0004-0020 1 2802 Series Zinc-Plated Steel Button Head Screw (M4 x 0.7mm, 20mm Length) - 25 Pack
2802-0004-0025 1 2802 Series Zinc-Plated Steel Button Head Screw (M4 x 0.7mm, 25mm Length) - 25 Pack
2812-0004-0007 1 2812 Series Zinc-Plated Steel Nylon-Insert Locknut (M4 x 0.7mm, 7mm Hex) - 25 Pack
2809-0075-0005 1 Synthetic Cable (0.75mm Diameter, 5M Length)
2915-0001-0001 1 Extension Spring (8mm OD, 6.8kg Max Load, 80-120mm Length)
2914-0002-0001 2 V-Groove Bearing Shield (2-1) - 2 Pack
4200-0090-0025 1 2.5mm Hex L-Key
4200-0090-0030 1 3mm Hex L-Key
4202-0070-1070 1 7mm Combination Wrench

Specs

Weight 870g (no motor)

This website uses cookies to ensure you get the best experience on our website