Shop By Product

RoboClaw Solo 60A Motor Controller

1 of 5


The RoboClaw Solo 60 A is an intelligent motor controller designed to control one brushed DC motor at 60 Amps continuous with up to 100 Amps peak. It can be controlled from USB, RC radio, PWM, TTL serial, analog and microcontrollers such as an Arduino or Raspberry Pi.

RoboClaw automatically supports 3.3 V or 5 V logic levels, travel limit switches, home switches, emergency stop switches, power supplies, braking systems and contactors. Power supplies can be used by enabling the built-in voltage clamping control feature. A built-in switching mode BEC supplies 5 VDC at up to 1.2 Amps for powering user devices.

Brushed DC motors can be controlled in open or closed loop using position or velocity control modes. RoboClaw features several built-in commands for controlling acceleration, deceleration, distance, speed, current sense, voltage limits and more. RC and analog control modes also include several user defined settings such as acceleration and decelerate speeds.

Dual quadrature encoders with up to 19.6 million pulses per second are supported and can be auto tuned using Ion Studio which is a free downloadable application. In addition, a wide range of sensor inputs including potentiometers and absolute encoders are supported. RoboClaw's closed loop functionality creates absolute control over speed, velocity and direction regardless of load changes.

RoboClaw incorporates several protection features including temperature, current, over voltage and under voltage limits. The protection features are self monitoring and protect RoboClaw from damage in any operating condition. Several user definable settings such as maximum current limit, maximum and minimum battery voltages are provided for more refined control.

RoboClaw's regenerative capabilities will charge a supply battery during slow down or breaking. It's advanced circuitry can change direction during full throttle without damage! RoboClaw also incorporates a LiPo cutoff mode to prevent battery damage.


  • Combine Channels
  • Peak Current per Channel: 100 A
  • BEC5: VDC @ 1.2 A
  • 3.3 V Safe Outputs
  • 5 V Tolerant Inputs
  • Quadrature Encoders
  • Absolute Encoders
  • Encoder Auto Tune
  • Thermal Protection
  • Current Sense
  • User Selectable Peak Current
  • Battery Protection
  • Regenerative Braking
  • Over Voltage Protection
  • Under Voltage Protection
  • Self Diagnostics
Product Weight 0.63 oz (18 g)
Dimensions 2.28" x 1.25" x 0.90" (58 mm x 32 mm x 23 mm)
Channels 1
Control Input USB, RC, PWM, TTL serial, Analog and Microcontroller
Input Supply Voltage Range 6 VDC - 34 VDC
Max Current per Channel (Continuous) 60 A
Max Current per Channel (Peak) 100 A
Motor Type Brushed DC
Motor Direction Bidirectional

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Connect With Us
Shop Secure

As Featured In

Copyright 1999-2020 Robotzone, LLC - All rights reserved. ServoCity® is a registered trademark of Robotzone, LLC.