FTC Competition Kit (21-22 Season)
SKU:
Build System: Actobotics
Introducing the 2021-2022 FTC Competition Kit! Check out the highlights!
Structure:
You’ll find a vast variety of channel-based building components, as well as extrusion-based build components. The array of parts range in size so you can beef up your chassis where necessary, while saving ounces where it counts!
Servos:
Four goBILDA® servos (two "Torque" and two "Speed") are included in this season’s kit. They boast steel gears to handle the abuse we know you’re able to dish out! These servos can rotate up to 300 degrees in feedback mode, or, can be put into continuous mode for unlimited rotation! We’ve included the programmer for you to pick the mode that best suits your needs.
Gear Motors:
Four goBILDA 5202 Series Yellow Jacket Gear Motors! We chose the 19:1 ratio as the go-to because they're excellent for most chassis designs, but they have plenty of torque to be able to be utilized in lifts and other areas of your robot. The M4 mounting holes on the face align with the included 1206-0016-0004 adaptor to convert to the Actobotics mounting pattern or you can clamp around the motor with the included 32mm clamping mounts.
Drive:
Hubs (including our awesome Barrel Hubs), ¼" D-shafting, Pinion Gears, Spur Gears, Sprockets and Chain, HD Wheels, Omni Wheels. That’ll do pig, that’ll do.
Wiring:
With REV Robotics® being the sole option on the controller, we’ve included encoder cables and motor cables for completely plug-n-play wiring.
Hardware:
While hardware often times goes unnoticed, just know we’ve put plenty in the kit. Wera brand Hex Plus keys have been provided for every bit of hardware that you’ll find in the kit!
For your convenience, we accept school purchase orders from approved applicants. Be sure to apply for your team discount in order to receive this already discounted kit, for an additional 25% off!
Electronics
| SKU | Description | Total Qty |
|---|---|---|
| 14-0014 x 1 | Matrix 12V 3000mAh NiMH Battery | 1 |
| 3101-0012-0060 x 1 | 12V NiMH / NiCad Smart Battery Charger with Tamiya connector | 1 |
| 2000-0025-0002 x 2 | 2000 Series Dual Mode Servo (25-2, Torque) | 2 |
| 2000-0025-0003 x 2 | 2000 Series Dual Mode Servo (25-3, Speed) | 2 |
| 3102-0001-0001 x 1 | 3102 Series Dual Mode Servo Programmer (1-1) | 1 |
| 3801-0203-0060 x 1 | XT30 to Tamiya Adaptor | 1 |
| 3801-0613-0100 x 4 | 2-Pin JST VH to 3.5 mm Female Bullet Adaptor | 4 |
| 3801-0709-0600 x 4 | 4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC] Adaptor (600mm Length) | 4 |
| 3802-1718-0300 x 2 | 12" Hitec Super-Duty Extension | 2 |
| 3802-1718-0600 x 2 | 24" Hitec Super-Duty Extension | 2 |
| 5202-0002-0019 x 4 | 5202 Series Yellow Jacket Planetary Gear Motor (19.2:1 Ratio, 24mm Length 6mm D-Shaft, 312 RPM, 3.3 - 5V Encoder) | 4 |
Structure
| SKU | Description | Total Qty |
|---|---|---|
| 545360 x 8 | Side Tapped Pattern Mount C | 8 |
| 545372 x 2 | 0.125" Hub Spacer | 2 |
| 545384 x 4 | 0.500" Hub Spacer | 4 |
| 545420 x 2 | Side Tapped Pattern Mount A | 2 |
| 545440 x 4 | 0.770" - 0.770" Pattern Adapter | 4 |
| 555176 x 2 | 32mm Bore Bottom Tapped Clamping Mount | 2 |
| 565018 x 2 | 3.00" X-Rail | 2 |
| 565030 x 2 | 6.00" X-Rail | 2 |
| 565042 x 2 | 10.50" X-Rail | 2 |
| 565046 x 2 | 12.00" X-Rail | 2 |
| 575112 x 2 | Standard Servo Plate A | 2 |
| 575124 x 2 | Standard Servo Plate B | 2 |
| 585002 x 4 | 4.5” x 6” Aluminum Pattern Plate | 4 |
| 585070 x 8 | 3/8" x 3/8" 90° X-Rail Bracket (2 pack) | 16 |
| 585074 x 2 | Raised Perpendicular X-Rail Mount | 2 |
| 585075 x 4 | X-Rail T-Bracket (2 pack) | 8 |
| 585076 x 4 | X-Rail L-Bracket (2 pack) | 8 |
| 585380 x 2 | U-Beam (5 Hole, 1.54" Length) | 2 |
| 585382 x 2 | U-Beam (7 Hole, 2.31" Length) | 2 |
| 585386 x 2 | U-Beam (11 Hole, 3.85" Length) | 2 |
| 585396 x 2 | U-Beam (21 Hole, 7.70" Length) | 2 |
| 585404 x 1 | 1.54" (5 hole) Aluminum Beams (2 pack) | 2 |
| 585408 x 1 | 3.08" (9 hole) Aluminum Beams (2 pack) | 2 |
| 585416 x 1 | 6.16" (17 hole) Aluminum Beams (2 pack) | 2 |
| 585423 x 1 | 12.32" (33 hole) Aluminum Beams (2 pack) | 2 |
| 585424 x 6 | 90° Single Angle Pattern Bracket | 6 |
| 585440 x 6 | 1.50” Aluminum Channel | 6 |
| 585442 x 2 | 3.00” Aluminum Channel | 2 |
| 585446 x 2 | 6.00” Aluminum Channel | 2 |
| 585448 x 2 | 7.50” Aluminum Channel | 2 |
| 585450 x 2 | 9.00” Aluminum Channel | 2 |
| 585452 x 2 | 10.50” Aluminum Channel | 2 |
| 585454 x 2 | 12.00” Aluminum Channel | 2 |
| 585456 x 2 | 13.50” Aluminum Channel | 2 |
| 585460 x 2 | 16.50” Aluminum Channel | 2 |
| 585468 x 2 | Flat Single Pattern Bracket | 2 |
| 585470 x 3 | 90° Dual Side Mount A (2 pack) | 6 |
| 585586 x 2 | Flat 0.770" Pattern Bracket C | 2 |
| 585588 x 2 | Flat 0.770" Bracket D | 2 |
| 585590 x 1 | 0.1" Drop-Center Bearing Plate (4 pack) | 4 |
| 585592 x 2 | Flat 0.770" Pattern Bracket F | 2 |
| 585628 x 2 | 90° Flat Pattern Bracket A | 2 |
| 585720 x 2 | 3" x 1.5" Pattern Plate (3 hole) | 2 |
| 585722 x 2 | 4.5" x 1.5" Pattern Plate (5 hole) | 2 |
| 585728 x 2 | 12" x 1.5" Pattern Plate (15 hole) | 2 |
| 605041 x 1 | Battery Strap Mount | 1 |
| 1206-0016-0004 x 2 | 1206 Series Pattern Adaptor (16-4) | 2 |
Drive Components
| SKU | Description | Total Qty |
|---|---|---|
| 525123 x 1 | Actobotics Servo Hub Shaft (25 Tooth Spline) | 1 |
| 525125 x 2 | Actobotics Lightweight Hub Horn (25 Tooth Spline) | 2 |
| 525150 x 1 | 0.250" 25 Tooth (3F/H25T) Spline, Servo to Shaft Clamping Coupler | 1 |
| 535118 x 1 | 1/2" Bore, Face Thru-Hole Pillow Block | 1 |
| 535198 x 8 | 1/4" ID x 1/2" OD Flanged Ball Bearing (2 pack) | 16 |
| 545444 x 1 | Dual Ball Bearing Hub | 1 |
| 545618 x 2 | 6mm Bore Clamping D-Hub (Tapped), 0.770" Pattern | 2 |
| 545619 x 6 | 0.250" Bore Clamping D-Hub (Tapped), 0.770" Pattern | 6 |
| 545692 x 2 | 1/4" D-Bore Barrel Hub | 2 |
| 545698 x 2 | 6mm D-Bore Barrel Hub | 2 |
| 595410 x 4 | 4" Heavy Duty Wheel | 4 |
| 595671 x 4 | 4" Omni Wheel | 4 |
| 615146 x 1 | 0.250" Chain (5 feet) | 1 |
| 615198 x 2 | 32 Pitch, 72 Tooth (.50" Bore) Aluminum Hub Gear | 2 |
| 615206 x 1 | 32 Pitch, 80 Tooth (.50" Bore) Aluminum Hub Gear | 1 |
| 615242 x 1 | 16T, 0.250" (1/4) Bore 32P Shaft Mount Pinion Gear | 1 |
| 615250 x 2 | 24T, 0.250" (1/4) Bore 32P Shaft Mount Pinion Gear | 2 |
| 615258 x 1 | 16T, 6mm Bore, 32P Shaft Mount Pinion Gear | 1 |
| 615266 x 1 | 24T, 6mm Bore, 32P Shaft Mount Pinion Gear | 1 |
| 625102 x 2 | 1/4 Flanged Aluminum Clamp Collar (2 pack) | 4 |
| 625300 x 2 | 0.250" D-Bore to 6mm D-Bore Barrel Coupler | 2 |
| 625302 x 2 | 0.250" Bore Steel Set-Screw Collar (2 Pack) | 4 |
| RHS-250-24 x 4 | 24 Tooth 0.770" Acetyl Hub Mount Sprocket 0.250" Pitch | 4 |
| RHS-250-32 x 4 | 32 Tooth 0.770" Acetyl Hub Mount Sprocket 0.250" Pitch | 4 |
| 634064 x 4 | 0.250" (1/4") x 1.50" (1 1/2") Stainless Steel D-Shafting | 4 |
| 634068 x 4 | 0.250" (1/4") x 2.00" Stainless Steel D-Shafting | 4 |
| 634074 x 4 | 0.250" (1/4") x 2.50" (2-1/2") Stainless Steel D-Shafting | 4 |
| 634078 x 4 | 0.250" (1/4") x 3.00" Stainless Steel D-Shafting | 4 |
| 634094 x 1 | 0.250" (1/4") x 12.00" Stainless Steel D-Shafting | 1 |
Fasteners / Hardware
| SKU | Description | Total Qty |
|---|---|---|
| 545532 x 1 | Channel Connector Plate (2 pack) | 2 |
| 98847A007 x 1 | 6-32 Stainless Steel Threaded Rod | 1 |
| 585433 x 1 | 6-32 x 0.250" (1/4) Heavy Duty Linkage (4 pack) | 4 |
| 585474 x 1 | Single Screw Plate (24 pack) | 24 |
| 585756 x 4 | X-Rail Nut (4 pack) | 16 |
| 615148 x 1 | 0.250" Pitch Chain Tool | 1 |
| 632106 x 8 | 6-32 x 0.250" (1/4) Zinc-Plated Socket Head Machine Screw (25 Pack) | 200 |
| 632108 x 8 | 6-32 x 0.3125" (5/16) Zinc-Plated Socket Head Machine Screw (25 Pack) | 200 |
| 632110 x 4 | 6-32 x 0.375" (3/8) Zinc-Plated Socket Head Machine Screw (25 Pack) | 100 |
| 632112 x 1 | 6-32 x 0.4375" (7/16) Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632114 x 1 | 6-32 x 0.500" (1/2) Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632116 x 1 | 6-32 x 0.5625" (9/16) Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632118 x 1 | 6-32 x 0.625" (5/8) Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632120 x 1 | 6-32 x 0.750" (3/4) Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632124 x 1 | 6-32 x 1.00" Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632128 x 1 | 6-32 x 1.25" (1-1/4) Zinc-Plated Socket Head Machine Screw (25 Pack) | 25 |
| 632142 x 4 | 6-32 Nylock Nuts Pack (25 pack) | 100 |
| 632144 x 4 | #6 Undersized Washers (25 pack) | 100 |
| 633104 x 2 | 0.250" (1/4) Shafting and Tubing Spacers (12 pack) | 24 |
| 633136 x 2 | 1.32" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) (4 pack) | 8 |
| 636075 x 8 | Plastic Locking Grommet | 8 |
| 5022070001 x 1 | Wera Tools 3/32 Ball End Hex-Plus L-Key | 1 |
| 5022071001 x 1 | Wera Tools 7/64 Ball End Hex-Plus L-Key | 1 |
| 5027104001 x 1 | Wera Tools 3mm Ball-End Hex-Plus L-Key | 1 |
| 2909-0101-0100 x 1 | Zip Tie (100mm Length, Black) - 100 Pack | 100 |
Tech Tips
Downloads
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the 637230-2122.
